Qubic Motion
5DOF Motion Set — QS-210/220 + QS-CH2 hero
1 / 2

5DOF Motion Set — QS-210/220 + QS-CH2 hero

Showing media for 5DOF Motion Set — QS-210/220 + QS-CH2
Qubic Systems · Motion Sets

5DOF Motion Set — QS-210/220 + QS-CH2

3DOF chassis + 2DOF traction-loss combined

5DOF bundle (3DOF actuator chassis + QS-CH2 surge/yaw)Available

Serious drivers, race teams and academies wanting the deepest actuator-based motion experience without stepping up to a full 6DOF cockpit.

Best for
Serious drivers, race teams and academies wanting the deepest actuator-based motion experience without stepping up to a full 6DOF cockpit.
Typical install
Dedicated motion bay with clearance and floor preparation for combined chassis + traction-loss travel.
Compatibility
Rally, drift, GT and F1 titles via Qubic Manager. Stacks chassis and traction-loss in a single configuration.

Specified, installed and supported by Forrest Motorsport. Pricing, availability and lead times confirmed on enquiry.

About this model

The flagship Qubic actuator bundle: a 3DOF QS-210 or QS-220 chassis stacked on a QS-CH2 traction-loss platform. The result is 5 combined degrees of freedom — pitch, roll, heave, surge and yaw — covering chassis motion and traction-loss cues for rally, drift, GT and F1 simulation, with the same low latency and low noise as the rest of the Qubic family.

How fast
is 8 ms?

Test your reaction time

Motion must be tightly synchronised with input telemetry. If a platform reacts too slowly, immersion breaks — and discomfort may follow. Professional systems operate below 15–20 ms from telemetry input to actual physical motion. Anything noticeably delayed simply feels wrong.

That's why real-world latency matters. Play Qubic Reflex, test your reaction, and compare it to our 8 ms latency.

Check your fastest reaction time or measure consistency across 5 consecutive runs. Choose your control style: classic Click to React or Clutch Drop — hold and release.

Test mode
Control style

Click the panel (or press Space) the instant the lights go out.

More in Motion Sets

Models You May Also Consider

2.5DOF Motion Set — QS-210/220 + QS-Pivot
Qubic
2.5DOF Motion Set — QS-210/220 + QS-Pivot
QS-Pivot combined with an actuator set (QS-210 or QS-220) simulates a heave sensation that effectively replicates load changes, elevation shifts, and weight transfer – delivering immersive depth without mechanical complexity. That means with just 2 actuators, the driver can perceive vehicle dynamics and road texture – almost like in a 3DOF configuration based on 4 actuators.
3DOF Motion Set — QS-210/220
Qubic
3DOF Motion Set — QS-210/220
Full 3DOF chassis motion bundle
What Forrest Motorsport adds

A Complete, Supported Install

  • Specification matched to driver, room and budget
  • Professional installation and cable management
  • Plugin and software configuration
  • Calibration and driver handover
  • Ongoing service, upgrades and support
  • Integration with chassis, seat, wheel and pedals

Talk to us about the 5DOF Motion Set — QS-210/220 + QS-CH2.