Qubic System Motion Simulators
Professional motion · Race-proven engineering
Qubic System motion platforms bring professional-grade movement, force feedback and immersion into simulator racing, flight simulation and driver training environments. Forrest Motorsport can help you choose the right Qubic product, design the complete simulator package, install the hardware, configure the software and support the system long term.
Filter By Category
Motion Systems
From compact home-friendly seat movers and actuator sets through to dedicated traction-loss platforms. Specified, installed and supported by Forrest Motorsport.
Motion Cockpits
Purpose-built motion cockpits combining chassis, traction-loss and full 6DOF platforms with over 342 mm of heave. Engineered for serious home users, academies and commercial venues.
Motion Sets
Curated bundles that combine QS-210/220 actuator sets with QS-Pivot or QS-CH2 to deliver 2.5DOF, 3DOF and 5DOF motion experiences out of the box.
Belt Tension Systems
Direct-drive seat belt tensioners that translate braking, cornering and traction-loss telemetry into physical pull on your shoulders — for racing and flight sims.
Motion Accessories
Compact accessories that extend the sensation of a Qubic actuator setup without committing to a full platform change.
Electronics & Safety
The brains, power supply and safety chain behind every Qubic platform — motion controllers, power cabinets and the MOTION-LOCK emergency-stop switch.
Motion controllers, safety switches, pivot accessories and installation kits for Qubic motion simulator systems.
Compare Qubic Motion Products
A quick way to position each platform against your room, budget and ambition. We'll narrow it down with you on enquiry.
| Product | Type | Motion / DOF | Best for | Guide price from | Typical customer | Install | Forrest package |
|---|---|---|---|---|---|---|---|
| QS-H13 Challenger | Seat mover | 2DOF | Compact, apartment-friendly motion | POA | Home sim racer upgrading a static seat | Low | Compact motion upgrade |
| QS-210 | Actuator set | 2DOF (scalable) | Entry-level Qubic actuator motion | POA | Enthusiast home rig | Medium | Entry Qubic actuator package |
| QS-220 | Actuator set | 2 → 3DOF | Serious detailed motion feedback | POA | Advanced home / small commercial | Medium | Serious actuator motion package |
| QS-CH2 | Motion platform | 2DOF surge + yaw | Traction-loss + rear-end character | POA | Academy, venue, training rig | Medium | Complete motion platform |
| QS-V20 | 4DOF cockpit | 4DOF | Premium home / academy sim | POA | Serious sim racer / driver coach | High | Premium 4DOF cockpit |
| QS-S25 | 6DOF cockpit | 6DOF | Professional simulation | POA | Pro driver / team / venue | High | Professional 6DOF cockpit |
| QS-S35 | Flagship 6DOF | 6DOF · 342 mm heave | Top-tier commercial install | POA | Commercial / pro training facility | Very high | Flagship commercial 6DOF simulator |
Why Buy Qubic Through Forrest Motorsport?
Buying motion hardware is only part of the project. Forrest Motorsport helps customers choose the correct Qubic product, match it with the right cockpit, wheelbase, pedals, display or VR setup, install and configure the system, test the software and support the customer after delivery. We can supply hardware-only packages or complete turnkey simulator builds for homes, teams, businesses, venues and training environments.
- Specification matched to driver, room and budget
- Professional installation and cable management
- Plugin and software configuration
- Calibration and driver handover
- Ongoing service, upgrades and support
- Integration with chassis, seat, wheel and pedals
A Complete, Supported Install
Room layout, hardware match, cockpit integration and budget planning before we order a single component.
Professional install, cable management, software stack, calibration and full driver handover on site.
Remote diagnostics, firmware help and staged hardware upgrades as your sim grows.
Build It In Stages
Most Qubic builds don't have to happen in one go. Start with a QS-H13 or QS-210, layer in QS-BT1 belt tension, step up to a QS-220 base, then a full 4DOF or 6DOF cockpit when the time is right. Talk to us about phased project planning so each upgrade lands cleanly on the previous one — no wasted hardware.
Built For Demanding Workloads
We have been working with Qubic Motion Systems for years and we genuinely rate their hardware. Across our own race room, academy sessions and the rigs we build for clients, these platforms run heavy workloads day after day — and they very rarely cause issues.
That reliability matters when you are running back-to-back sessions, managing a fleet or selling a simulator to a customer who needs it to perform without fuss. Qubic's support is responsive, the engineering is solid, and the motion feel is genuinely impressive. It is one of the reasons we are comfortable specifying and installing Qubic systems with our own name behind them.
Qubic FAQ
Where can I see a Qubic platform in motion?
Forrest Motorsport's race room is set up for demonstrations across the Qubic range. Book a consultation and we'll arrange a session that matches the platform you're considering.
Do I need to install the system myself?
No. Every Qubic platform we supply is installed, calibrated and handed over by Forrest Motorsport. That includes cable management, software setup and driver handover.
What software does Qubic run on?
The entire ecosystem runs on the free Qubic Manager licence, with native support for iRacing, ACC, AMS2, rFactor 2, Le Mans Ultimate and most major racing and flight titles.
Can I start small and upgrade later?
Yes — that's the strength of the Qubic ecosystem. A QS-210 or QS-220 build can grow into 3DOF, then add traction-loss, belt tension and a flagship 6DOF platform over time.
Are the prices on this page final?
Guide prices only. Final cost depends on configuration, availability, extreme exchange rates changes, delivery, installation, calibration and support. We'll quote a complete installed package based on your use case.
Can you handle the whole project, not just the hardware?
Yes. We supply hardware-only packages or complete turnkey simulator builds — including room design, cockpit, wheelbase, pedals, displays/VR, install, calibration, software and aftercare.
Qubic supported games and simulators
Qubic motion systems support a wide range of racing games, flight simulators and professional simulation applications. Use this list as a quick guide, and contact Forrest Motorsport if you need help confirming compatibility for a specific setup.
Compatibility can depend on platform, software version, telemetry output and Qubic software configuration. Please confirm your exact requirements before purchase.
Need to check compatibility?
Tell us what software, hardware and Qubic system you are planning to use. Forrest Motorsport can help confirm the right setup.